You are here:

Sleep Mode is a feature of the Control Pod 2.0 and Control Pod 3.0, which allows the user to turn off the control pod with arms plugged in.

 

Please note, this mode still uses a small amount of power. We recommend only using it for short periods, or while the Control Pod is plugged in to a power source. Power may drain from the pod after several days in this mode.

 

Activating Sleep Mode on a Pod 3.0

 

Sleep mode is activated by holding the bluetooth button for 10 Seconds.

 

A rapid flashing red light will show on the back of the pod, and any connected Lighting Arms will turn off when you release the button.

 

To end sleep mode, tap the bluetooth button once and any connected Lighting Arms will turn on as they were saved.

 

Activating Sleep Mode on a Pod 2.0

 

Sleep mode is activated by holding the top button for 10 Seconds.

 

A green light will show on the back of the pod, and Lighting Arms will turn off when you release the button.

 

To end sleep mode, tap the top button again.

Control Pod

Additional Resources

 

Adaptalux Studio information: Adaptalux Lighting Studio

Video Demo and Tutorials – Adaptalux Studio Demo

Manual brightness control – Manual Brightness Control

Table of Contents