You are here:
Updated11th February 2025

Flash Arm will not Fire at all, but the Trigger test button works.

  1. Ensure the Trigger is not low on battery.
  2. Ensure Trigger is fully secured on to your Cameras hotshoe.
  3. Ensure your camera is turned on and your shutter speed is 1/200s or 1/160s.

Flash Arm only fires sometimes

  1. Ensure your Pod is sufficiently charged and you are using boost mode. This ensures your Flash Arms have the quickest recycle times.
  2. Ensure the Flash Arm is in range of the Trigger (within 1.5 metres).
  3. Ensure you are waiting sufficient time for that set power level for it to re-charge between shots.

Flash Arm does not fire at all

  1. Ensure your Trigger is turned on, does it fire using the test button?
  2. Ensure your Trigger is not low on battery.
  3. Ensure your Pod is sufficiently charged to support the Flash Arm.
  4. Ensure your Flash Lighting Arm is connected to your Pod properly.
  5. Ensure the Flash Arm has atleast one single Red power level light showing. If it does not, refer to here.
  6. Ensure the Flash Arm is in range of the Trigger (within 1.5 metres). Use the Trigger test button to determine this.

Still need help?

Contact Us
Table of Contents